So I took this piece of plastic shade and decided that I was going to decoupage some fabric on it. I wanted it to still transmit light so I bought a shear fabric from the clearance rack at Joann's. It was still $5/yd, but I only needed a half yard so I figured what the heck.
Step 2 - Pull the fabric gently and smooth it so that there are no wrinkles.
Step 3 - cover the top of the fabric with glue and coat it until the fabric is fully saturated. Smooth the glue in one direction making sure that there aren't any drips of clumps. Let sit over night
Step 4 - After allowing the front side glue to dry you can flip over the piece. Trim the edges neatly, leaving about an inch to wrap around to the back side.
Step 5 - Apply glue on the plastic and wrap the fabric around the back. Apply more glue on the top making sure to smooth out all the wrinkles as you go. Let the glue dry over night again.
Step 6 - Neatly cut the remaining fabric from the ends so that you can make the cylinder shape out of the plastic shade.
Step 7 - Assemble the shade
Step 9 - Remove the paper clips and apply one more coat of glue to the ribbons. Allow this to dry.
Step 10 - Assemble the lamp with the metal hardware that it comes with and viola you have a new custom lampshade.















